Where is Seplat Energy Operations Office located in Port Harcourt: Your Guide to Finding It Easily 2026

Key Landmarks and Nearby Areas: Trans-Amadi is well-connected to other parts of Port Harcourt. Major roads like the Trans-Amadi Road itself and Peter Odili Road run through or near the area. Important landmarks and areas close by include Eleme Junction, Garrison, Rumuokoro, and the Port Harcourt International Airport (though the airport is a bit further out, Trans-Amadi is a common route to it).

Detailed Route and Area Breakdown

The Seplat Energy Operations Office in Port Harcourt is located at:

Plot 130, Trans Amadi Industrial Layout, Port Harcourt, Rivers State, Nigeria.

Here’s how you can get there from various popular points in Port Harcourt:

From Mile 1/Mile 3 Park (Diobu)

If you are coming from areas like Mile 1 or Mile 3 in Diobu, you will typically need to head towards the Trans-Amadi Industrial Layout. You can:

• By Commercial Bus: Look for buses going towards Eleme Junction or directly into Trans-Amadi. You might need to take one bus to a major junction like Garrison or Rumuola, and then another bus or a Keke Napep (tricycle) into Trans-Amadi. Ensure you tell the driver or conductor your destination is "Seplat Office, Trans-Amadi."
• By Keke Napep: A Keke Napep can take you directly from Mile 1/Mile 3 into Trans-Amadi. This is often more convenient but can be slightly more expensive than a bus. Agree on the fare before you start the journey.
• By Ride-Hailing Service: Using apps like Bolt or Uber is a comfortable and direct option. Simply input "Seplat Energy, Plot 130, Trans Amadi" as your destination.

From Rumuokoro

Rumuokoro is a major transport hub. From here, getting to Trans-Amadi is straightforward:

• By Commercial Bus: Take a bus heading towards Garrison or Eleme Junction. You will typically drop at a strategic point within Trans-Amadi (e.g., near the Slaughter Market or Peter Odili Road junction) and then take a short Keke Napep ride or walk to Plot 130.
• By Keke Napep: Keke Napeps are readily available at Rumuokoro and can take you directly to the Seplat office. Confirm the fare first.
• By Ride-Hailing Service: This is a reliable option for a direct trip.

From Garrison/Rumuola

Garrison and Rumuola are closer to Trans-Amadi, making the journey quicker:

• By Commercial Bus: Look for buses specifically heading into Trans-Amadi Industrial Layout. Some might go directly via Peter Odili Road.
• By Keke Napep: This is a very common and efficient way to get into Trans-Amadi from Garrison or Rumuola.
• By Ride-Hailing Service: Quick and convenient for a direct journey.

From Eleme Junction

Eleme Junction is at the very edge of the Trans-Amadi Industrial Layout. From here, the Seplat office is quite close:

• By Commercial Bus/Keke Napep: You can easily find a Keke Napep or a short bus ride from Eleme Junction deeper into Trans-Amadi. Plot 130 will be just a few minutes away.
• By Ride-Hailing Service: A very short trip.

When you get into Trans-Amadi, look out for landmarks like other major company offices, industrial parks, and the general layout of the area. Plot 130 is a specific address, so asking for directions once you are within Trans-Amadi should be easy.

Current Fare Estimates Table (2026)

Please note that these are estimated fare ranges for 2026 and can change due to fuel prices, time of day, traffic, and negotiation. Always confirm the fare before starting your journey, especially with Keke Napep and commercial bus drivers.

Best Departure Points (Parks/Terminals)

When heading to Seplat Energy's office in Trans-Amadi, here are some of the best places to easily find transport:

• Rumuokoro Park: This is a major transport hub with buses and Keke Napeps going to almost all parts of Port Harcourt, including Trans-Amadi.
• Garrison Bus Stop: Another very popular bus stop where you can find vehicles heading towards Trans-Amadi or Eleme Junction.
• Mile 1 Park: A busy park in Diobu where you can board buses or Keke Napeps. You might need to connect through Garrison or Rumuola.
• Eleme Junction: If you are coming from outside Port Harcourt or from the Eleme/Ogoni axis, Eleme Junction is a good drop-off point to catch a Keke Napep directly into Trans-Amadi.

For ride-hailing services, you can request a car from your exact location, which offers maximum convenience.

Safety and Travel Tips

To ensure a smooth journey to Seplat Energy's office, keep these tips in mind:

• Plan Your Journey: Use a map app (like Google Maps) to get a visual idea of the route.
• Allow Extra Time: Port Harcourt traffic can be unpredictable, especially during peak hours (morning rush, lunch break, evening rush). Give yourself enough time to avoid being late.
• Confirm Fares: Always confirm the fare with Keke Napep drivers or commercial bus conductors before you start your journey. This helps avoid arguments later.
• Stay Aware: Be mindful of your belongings, especially in crowded bus stops.
• Ask for Directions: Don't hesitate to ask locals for directions if you feel lost. People are generally helpful. Ask for "Seplat Office at Plot 130, Trans-Amadi."
• Travel During Daylight: For safety and easier navigation, try to schedule your visits during daylight hours.
• Keep Emergency Contacts Handy: Always have your phone charged and emergency contacts saved.

Reaching the Seplat Energy Operations Office in Port Harcourt is quite manageable with the right information. By following this guide, you should have a stress-free trip to your destination. Remember, Seplat Energy is a significant player in Nigeria's energy sector, and its Port Harcourt office is a key point of contact for many stakeholders.

Recommended Reads

Looking for more transport and location guides in Nigeria? Check out these helpful articles:

• Where is Oshodi Located in Lagos? LGA, Landmarks & Transport Guide
• Where is Ikeja Located in Lagos? LGA, Landmarks & Transport Guide
• Where is Victoria Island Located in Lagos? LGA, Landmarks & Transport Guide